PureLink by Dtrovision
G
14
h
EDID Burn
i) Int EDID Burn
-
On this menu, select an EDID from the library and save it on to the Input EEPROM. HX series
Matrix Router has 14 selectable most widely used EDID data pre-programmed and 6 empty slots that
can be used to upload and save EDID data from any external display device.
z
Select Internal EDID using UP (Create) and Down (Preview) buttons
z
Select Input# where selected EDID data will be saved on to. Multiple Inputs can be selected at
once.
z
Push enter button to save
* “P” will display on the LCD when EDID is successfully saved, “F” will display on the
LCD when EDID is NOT successfully saved.
ii) Ext EDID Burn
- This menu is to emulate EDID data from any display devices that are connected to the
Matrix Router's Output via copper cables and save it on to Matrix Router's Input EEPROM.
z
Select
Output
#
z
Selected Output's display device's EDID information will be displayed
z
Select Input# where selected EDID data will be saved on to. Multiple Input can be selected at
once.
z
Push enter button to save.
* “P” will display on the LCD when EDID is successfully saved, “F” will display on the
LCD when EDID is NOT successfully saved.
h
EDID Store
- On this menu, user can emulate EDID data from any display devices that are
connected to Matrix Router's Output via copper cables and save it on to the EDID library
for future use.
z
Select
Output
#
z
Selected Output's display device's EDID information will be displayed
z
Select empty slot on EDID library where selected EDID data will be saved on to.
z
Push enter button to save.
* “P” will display on the LCD when EDID is successfully saved, “F” will display on the LCD when EDID
is NOT successfully saved.
h
Router ID
- By setting different ID to the Matrix Router, up to 255 units of HX series Matrix Router can be
connected and operated in the same network either via serial or LAN communication. Router ID can be
set between 001 ~ 255.
* Factory default setting is 001
