Installation Instructions
WARNING-
This product should only be installed and serviced by a
qualified professional. Please refer to “General Warnings” for additional safety
information.
Pump Location
Before installing the pump, selecting a proper location for your pump is essential to
prolonging the overall lifespan of your pump. Be sure the pump’s location meets the
following requirements:
1. Install the pump as close to the pool or spa as possible. Using short, direct
suction piping returns will reduce friction loss and improve efficiency.
2. Do NOT install the pump more than 10 feet above the water level.
3. Select a well-drained area, one that will not flood during the rain.
4. Do NOT install pump in a damp or non-ventilated location
5. Install the pump with a rear clearance of at least 3 inches so that the motor can
be easily removed for maintenance and repair.
Plumbing
1. For improved pool plumbing, it is recommended to use a larger pipe size.
2. Piping on the suction size of the pump should be the same or larger than the
return line.
3. All plastic fittings must be new or thoroughly cleaned before use.
4. Do NOT attempt to force hose connector fitting past thread stops molded into the
inlet and outlet ports.
5. Do NOT over- tighten fittings or you may cause damage
PURELINEPOOL.COM
TEL: 407-834-2200
7
