2
3
WARNINGS AND PRECAUTIONS
● Unplug the cord when unit is not in use for an extended period of time and/
or when no one is home.
● Do not keep water in the tank when not in use for an extended period of
time.
● Use only the cleaners and additives recommended by the manufacturer on
Pages 9-10 of this manual to clean the water tank.
● The use of water additives including ethereal/essential oils, fragrances,
eucalyptus, water conditioners, etc. will damage the appliance materials
and as a consequence the whole unit.
● Do not use this product near any other electronic device.
● Do not cover the mist nozzle at any time during use.
● Do not put anything on or in the tank.
● When unplugging from outlet hold humidifier securely.
● Do not place cord over objects.
● Do not get water in or on the power cord or where it connects to the
product.
● Do not use when plugged in near a sink.
● Do not touch the water tank during operation.
● Do not submerse the unit in water or pour water on the unit or in the
humidity spout.
● Do not cover the spout with a cloth or hand and do not use without the
spout.
● Use clean or distilled water in tank. Hard water areas will require more
frequent cleaning.
4
5
FCC NOTICE
Model: MistAire Ultrasonic Cool Mist Humidifier (PEHUMIDIF)
This device complies with Part 18 of the FCC rules.
Pure Enrichment
14505 Astronautics Lane
Huntington Beach, CA 92647
www.pureenrichment.com
This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. The equipment should be
maintained as discussed in this manual. Changes or modifications not ex-
pressly approved by Pure Enrichment will void the user’s authority to operate
the equipment. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult dealer or experienced radio/TV technician for help.
