page 6
1.2 GENERAL INFORMATION ON THE USE OF THE SANITIZER
This manual has been created in order to provide the user with a general knowledge of the product
and the maintenance instructions deemed necessary for its proper functioning.
Before proceeding with installation, maintenance and repairs, read the Manual carefully,
it contains all the information necessary for the correct use of the product and avoid injuries.
The control and maintenance frequencies prescribed by the manual are always intended
as the minimum necessary to guarantee the efciency, safety and duration of the product
in normal working conditions, the surveillance must in any case be constant and
yes it must intervene promptly in the event of anomalies.
All routine maintenance, checks, etc., must be performed with the product deactivated and disconnected
from (electrical) energy supplies.
WARNING:
any modication or tampering, not authorized by the manufacturer, to the product
and to the safety systems invalidates any responsibility of the manufacturer with regard to CE conformity.
1.3 PRODUCT USE
It is the user's task to inform (by delivering this manual) and train the employees
(conductors and maintenance technicians) so that these indications are brought
to the attention of the personnel who will work on the product.
Do not allow unauthorized personnel to intervene on the product or start it in failure.
Before using it, make sure that any dangerous conditions for safety have been
appropriately eliminated, that the protections are in place and the safety devices are present and efcient.
Make sure that there are no foreign objects, hot material, vapors, fumes, solvents or chemicals, etc.
in the area close to 1m of the contour.
Connection work, commissioning, maintenance, measurements and adjustments
of the electrical equipment or its components must only be carried out by qualied personnel.
1 Introduction
