page 15
5 Installation and use
5.2 POWER SUPPLY
Make sure that the mains voltage and frequency correspond to those indicated on the product identification
plate or in the wiring diagram.
5.3 USE AND COMMANDS
Placement and Operation
For best results the unit should be placed in a central
location and three feet or higher from the ground. Operation
is very simple. Remove the SHU from the packaging.
high or low position.The unit can remain in the on position 24/7.
Place in desired location, plug it in and rock the switch to the
NOTE: Only one fan and one
led runs on the low setting.
Off | On Switch
5.4 ELECTRIC VOLTAGE
SHU 610 - 1810 - 2410X is powered with a portable DC 24 V power adapter with a nominal input voltage of
100-240 VAC and a 1.80 m power cord. The adapter is equipped with a power cable of 1.50 m. Detachable
and interchangeable, to meet any needs.
For your safety and to ensure the correct functioning of your SHU 610 - 1810 - 2410X, we recommend that
you only use the CE / Gs (safety mark) power supply supplied in the original packaging.
Even momentary interruption of the electric power immediately stops the action of the product.
Restoring normal power conditions will restart the product to normal conditions.
