8
Installation of the carbon
filter
7. Remove the filter frame
from the unit.
8.
Separate the filter fixer
from the filter frame.
9.
Remove the active
carbon filter from its
plastic bag.
10. Insert the active carbon
filter into the filter frame.
11. Fix the filter by
reassembling the fixer
onto the filter frame.
12. Re-fit the filter frame
inside the unit.
OPERATION for electronic type
Control panel
FIG.12
1. ON/OFF (power) button
2. Sign for dehumidification/water full
3. Sign for fan (ventilation)
4. Mode button
5. Sign for heat function
6. Sign for Centigrade or Fahrenheit
(please refer to the real unit you
purchased)
7. Swing button
8. Sign for sleep function
9. Sleep function button
10. “Temperature down”button
11. Room temperature display
12. Receiver for remote control
13. Timer display
14. “Temperature up”button
15. Timer button
16. Sign for TiO2/ionizer (only for the unit with
TiO2/ionizer)
17. TiO2/ionizer button (only for the unit with
TiO2/ionizer function)
18. Fan speed display
19. Sign for automatic function
20. Fan speed button
21. Sign for cooling function
Turning ON/OFF
1.
Press ON/OFF button, the unit will start automatically. If the ambient temperature is
higher than 23
o
C, the unit will work in cooling model.
higher than 20
o
C but below or equal to 23
o
C, the unit will work in ventilation
