1
SCOPE OF INSTRUCTION MANU
Α
L
Dear Customer,
THANKS FOR CHOOSING OUR HOOD. In the sections provided here in, there is necessary information which will
enable you to use the device efficiently and safely. Please, read these instructions carefully before installation of the
device
Section 1
Important points which must be observed before using the chimney
Section 2
Technical specifications of the chimney hood.
Section 3
Technical dimensions of the chimney hood
Section 4
Electrical diagram of the chimney hood.
Section 5
Information about installation connection of the chimney hood.
Section 6
Information about use of the chimney hood.
Section 7
Information about maintenance of the chimney hood.
THE DEVICE IS PRODUCED AS EARTHED.
DO NOT USE IT WITH UNEARTHED PLUG.
IMPORTANT PRECAUTIONS AND POINTS WHICH MUST BE OBSERVED
Section 1
1.
The electrical and installation connections must be done by the service staff who is well-informed of the subject;
2.
The operating voltage is 220 – 240 Volts. Do not operate the device in lower or higher voltage.
3.
Do not connect to the chimneys where the heating stove is connected, to the gas flue or to the chimneys where the
fire rises.
4.
Plug the product into the socket where there is an earthed connection.
5.
Fire catching food should not be cooked under the device.
6.
Do not use other materials instead of aluminum filter in the device.
7.
Do not plug into the socket without completion of the installation of the device.
8.
Do not run the device without aluminum filter.
9.
Do not touch the bulb of the device when it is left on for a long time
10. Do not remove the aluminum filter when the device is running.
11. Do not turn off the device directly by plugging it out when it is running. Turn it off from control panel.
12. The device should be cleaned periodically.
.
13. The height between the lower surface of the chimney hood and oven must be 65 cm for electrical ovens, and 75 cm
for gas-fired or mix ovens
