8
CAUTION!
You may cause fire if you do not observe the rules pertaining to cleaning and replacing the filters of the chimney
hood.
Replacing the Bulb
There are 2 pieces of 25 W halogen bulbs on the chimney hood. First of all, plug out the product, or turn off the power
switch, or loosen or turn off the safety fuse supplying the chimney hood to replace the bulb. Slightly press on the
connecting tabs existing on the cover of the halogen bulb with a thin tip screwdriver and push them downward. Hold
the cover carefully not to let it drop down when performing this operation. Slightly push the cover by aligning the tabs
to the cavities on bulb hole after the bulb is replaced. It is recommended that the new bulb is fixed with cloth. It is
because of fact that the life of the bulb will expire in 1 day when the halogen bulbs are touched with bare hand.
CAUTION!
Touch the bulb only when you will replace it. The life of bulb will expire after one day when the halogen bulb is
touched when it is not broken.
Firstly, disconnect the electricity of the chimney hood and dismantle it if you need it to be transported. Carry it in its
original box, if possible, and observe the transportation signs put on the box. If no original box, make sure that the
product is packed so that it would protect from any damage.
We kindly ask you to observe following recommendations:
1. Make sure that the Warranty Certificate is endorsed by the Authorized Seller when the product is received.
Use the product in accordance with the principles provided in the instructions for use.
Ask for the “technician identity card” from the technician who came for the technical service.
2.
3.
