Quick Start Guide
Page 13 of 14
Modifying the Device Location on the Map
Once the location has been saved to the map, fine adjustments can be made by dragging the icon to a
specific location. To edit the location, select the “Edit” checkbox above the map and click and drag the
icon with your cursor. Once the icon is in the desired location, click the
button and uncheck the
“Edit” box.
Ver & Comm
The Ver & Comm page contains information on the software and hardware versions of the device. This
page is used only in troubleshooting and cannot be edited.
Firmware & Template
The Firmware & Template page is use for updating the firmware and template. This page is generally only
handled by troubleshooting. For assistance with firmware and template updates, you can contact
Before updating any firmware, set the device power in the Configuration page to ON for 20 minutes. This
will trigger the device to stay awake for a 20 minute window on its next connection (likely its next
scheduled upload time). When the device is awake, click the Dowload button to begin the firmware
download. The progress of the download will be tracked in the Firmware Transfer Status table.
To update the template, select the newest version from the Template Setup drop-down and click Apply.
