Front View:
Switch
UPS Status LED
AC Mode: green lighting
Battery Mode: yellow flashing
Alarm mode: red lighting
3
2
1
NOTE: Rear view receptacle type
may differ from illustration
Rear View:
LINE INTERACTIVE UPS
PRODUCT OVERVIEW
SPECIFICATIONS
INSTALLATION & INITIAL STARTUP
Model: BU-360
Capacity: 650 VA / 360 W
Inspect this unit before beginning installation. Occasionally, products are damaged during shipment. If any
components are damaged, contact PumpSpy
™
at (833) 786-7779 for assistance.
PLACEMENT & STORAGE CONDITIONS
Install the UPS in a protected area that is free of excessive dust and has adequate air flow. Please place the UPS
away from other units, at least 20 cm to avoid interference. Do NOT operate the UPS where the temperature
and humidity is outside the specific limits. (Please check the specs for the limitations.)
CONNECT TO AC POWER TO BEGIN BATTERY CHARGING
Plug in the AC input cord to the wall outlet. For the best results, charge the battery at least 6 hours before
initial use. The unit charges its battery while connected to the power.
Input
Voltage
110V AC / 120 VAC
Voltage Range
81-134 VAC / 89-145 VAC
Output
Voltage Regulation
±10%
Transfer Time
Typical 2-6 ms, 10 ms max.
Waveform
Simulated Sine Wave
Battery
Type & Number
12V / 7AH x 1
Charging Time
6 hours recover to 90% capacity
PHYSICAL
Dimension (DxWxH mm)
297 x 101 x 142
Net Weight (kgs)
4.2
ENVIRONMENTAL
Humidity
0-90 % RH @ 0-40°C (non-condensing)
Noise Level
Less than 40 dB
