11
Please get highlighted that lithium battery packs can be wired in parallel and in series. In
the parallel connection, the battery s capacity is calculated by multiplying single battery
capacity by the number of cells with total voltage stay the same. The voltages imbalance
may cause fire or explosion .Lithium battery is recommended to charge in series.
🛑
Discharging
The main purpose of discharging is to clean residual capacity of the battery, or to reduce
the battery voltage to a defined level. The same attention should be paid to the discharg-
ing process as charging. The final discharge voltage should be set up correctly to avoid
deep-discharging. Lithium battery can not be discharged to lower than the minimum volt-
age, or it will cause a rapid loss of capacity or a total failure. Generally, lithium battery
doesn‘t need to be discharged. Please pay attention to the minimum voltage of lithium
battery to protect the battery.
Some rechargeable batteries have a memory effect. If they are partly used and recharged
before the whole charge is accomplished, they remember this and will only use that part
of their capacity next time. This is a memory effect. It is said that NiCd and NiMH batteries
are suffering from memory effect. NiCd has more memory effect than NiMH.
🛑
The socket-outlet should be installed near the equipment and easily accessible.
FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Any changes or modifications not expressly approved by the party responsible for com-
pliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiv-
er is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning and Safety Notes
