5
PANEL DESCRIPTIONS
1. Power ON/OFF Switch
2. PEAK LED indicates if a connected source level is too high. If the PEAK
LED is RED, reduce the zone input or output level.
3. Standby/Zone ON LED- When this LED is BLUE this indicates a zone is not
on or in Standby mode. When this LED is WHITE it indicates that a zone is
on.
1. Stereo line-level Pre-Amp outputs
(Zones 1-3)
2. Mode Switch: Mono/Bridge
3. Speaker Outputs: 50w @ 4 Ohms-
Stereo, 25w @ 8 Ohms-Stereo,
100w @ 8 Ohms-Bridge
4. Integrated Wifi Adapter and
Antennae
5. Zone Status: Used to control
external Zone Devices
6. Source Inputs (Input 1/PA)
7. IR Outputs to control Sources
8. A) PA Trigger IN (Source 1)
B) MUTE In/Control Out: This
input can temporarily mute the
system by connecting this unit to
a relay closure switch on home
automation system or phone
system etc. When switch is on,
it will short-circuit the input and
mute the unit.
9. Expansion IN/OUT Port: Connects
up to 3 units’ total
10. RS232 Port
11. Voltage Selector (115v in US)
12. AC Input
13. Keypad Hub Input
14. ACG (Automatic Gain Control):
brings low input levels up to a
preset-level
15. Unit ID Switch
1
2
3
1 2
3
4
5
6
10
8
9
15
11
14
13
12
7