Pulse Secure MAG2600 Скачать руководство пользователя страница 80 | Manualshive

Страница: 80 / 86

Pulse Secure MAG2600 Скачать руководство пользователя страница 80

MAG Series Pulse Secure Gateways Hardware Guide

© 2016 Pulse Secure, LLC., All rights reserved.

80

Grounded Equipment Warning

WARNING: The Pulse Secure Gateway is intended to be grounded. Ensure that the Pulse Secure Gateway is
connected to earth ground during normal use.

Midplane Energy Hazard Warning

WARNING: High levels of electrical energy are distributed across the Pulse Secure Gateway midplane. Be
careful not to contact the midplane connectors, or any component connected to the midplane, with any
metallic object while servicing components installed in the Pulse Secure Gateway.

Multiple Power Supplies Disconnection Warning

WARNING: The Pulse Secure Gateway has more than one power supply connection. All connections must be
removed completely to remove power from the unit completely.

Power Disconnection Warning

WARNING: Before working on the Pulse Secure Gateway or near power supplies, unplug the power cord from
an AC-powered Pulse Secure Gateway; switch off the power at the circuit breaker on a DC-powered Pulse
Secure Gateway.

TN Power Warning

WARNING: The Pulse Secure Gateway is designed to work with TN power systems.

Copper Conductors Warning

WARNING: Use copper conductors only.

DC Power Electrical Safety Guidelines and Warnings

When working with DC-powered equipment, observe the following guidelines and warnings:

•

DC Power Electrical Safety Guidelines

•

DC Power Disconnection Warning

•

DC Power Grounding Requirements and Warning • DC Power Wiring Sequence Warning

•

DC Power Wiring Terminations Warning

•

DC Power Electrical Safety Guidelines

The following electrical safety guidelines apply to a DC-powered Pulse Secure Gateway:

«
...
78
79
80
81
82
...
»

Содержание MAG2600























































































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды