Locknut
WARNING
When installing or adjusting any piece of PULSE
FITNESS equipment , DO NOT leave any adjustment
devices projecting which could cause injury to a third
party.
Figure U
Feet Adjustment
Installation
(Continued)
10.2 Feet Adjustment
Once the Treadmill has been sited you must ensure
that it is stable. If there is even a slight rocking
motion or the unit is not stable, determine which
foot is not resting on the floor. If necessary, adjust
the height of the feet to compensate for any un-
evenness in the floor. Turn the feet to the left or
right to increase or decrease the height as
appropriate. [See Figure U]. When satisfied,
securely fasten the locknut against the Feet Strut.
Place the front roller guides under front wheels.
This is a 3 person procedure and great care should
be taken when fitting. [See Figure T].
Note:
It is extremely important that the feet are
correctly adjusted for proper operation. An
unbalanced unit may cause Running Belt
misalignment. A spirit-level is recommended to
ensure proper levelling.
Figure T
Roller Guides
Assembly, Operation & Parts Manual G-Range CV Pg
37