Pulse-Eight neo:4Pro, Руководство пользователя

Страница: 11 / 35

11
4 Once initialization has been completed, the System Health, Network and Cloud LEDs should all appear ON (green)
5 Check the LED status on the attached neo Receivers to ensure correct installation and connection See LED Status
in Troubleshooting section
1 Insert the supplied power cord and plug into the AC mains
2 Turn ON the power switch
3 As it powers ON, the front panel LEDs (System Health, Network, Cloud) will illuminate momentarily before it begins
its initialization sequence
Note: The initialization process takes between 20 seconds and up to 2 minutes. However, it is possible that a firmware
update may be available the first time the unit is powered ON - in this instance the matrix may take longer to initialize.
If both the System Health and Network LEDs flash (orange/green) quickly together then a firmware update is being
applied. Please wait and do not disconnect the power until this update has completed.
Note: The Green LED of the HDBaseT port (RJ45) on the neo Receiver should illuminate when there is power to the device
– i.e. it is receiving PoH/PoE.
Turning On The Matrix