Pulsar Trionyx T3, Руководство пользователя

Страница: 93 / 112

1. Select the Stadiametric Rangefinder function with short presses of
the МENU (3) button until the icon is selected.
2. The following will be displayed: lines to determine the distance, icons of
three objects and digits of the determined distance to three objects.
3. Position the lower fixed bar under the object being ranged.
4. By pressing the UP (2)/DOWN (5) buttons, move the upper horizontal
bar relative to the lower fixed bar until the object fits entirely between
the two bars. The distance to the object is automatically recalculated
as you move the upper line.
5. If the rangefinder doesn’t work within 10 seconds, the information
disappears from the displays.
6. Exit the rangefinder mode with a long press of the МENU (3) button or
wait 10 seconds to exit automatically.
Notes:
There are three predefined values for the reference objects: Hare - 0.3
m height, Boar - 0.7 m height, Deer - 1.7 m height.
The distance value is rounded off before being displayed: up to 5 m for
large distance values, up to 1 m for smaller distance values.
To select the unit of measurement (Meters or Yards), go to the
General
Settings
Image not found or type unknown
menu item => Units of Measure submenu.