www.pulsar.pl
PWB series
7
Green LED AC:
on
– PSU is supplied with 230 V
off
– no 230 V power, battery operation
Green LED DC:
on
– presence of DC voltage in output of PSU
off
– no voltage in output of PSU
Red LED CHARGE:
off
– no battery charging
on
– battery charging process
3. Operating status indication.
The power supply unit features LED status indication
3.1 Optical indication.
PSU is equipped with LED indicating presence of voltage at PSU output, located on PCB of PSU module.
Signalling can be extended with optional PKAZ168 module (available offered by PULSAR):
4. Maintenance.
Any and all maintenance operations may be performed following the disconnection of the PSU from the power
supply network. The PSU does not require performing any specific maintenance measures, however, in the case of
significant dust rate, its interior is recommended to be cleaned with compressed air. In the case of a fuse replacement,
use a replacement of the same parameters.
WEEE LABEL
Waste electrical and electronic equipment must not be disposed of with normal household waste. According
to the European Union WEEE Directive, waste electrical and electronic equipment should be disposed of
separately from normal household waste.
CAUTION!
The power supply unit is adapted for cooperation with the sealed lead-acid batteries (SLA). After the operation
period they must not be thrown but recycled according to the applicable law.
Pulsar sp. j.
Siedlec 150, 32-744 Łapczyca, Poland
Tel. (+48) 14-610-19-40, Fax. (+48) 14-610-19-50
e-mail: