www.pulsar.pl
PSBSH1012B
5
1.4 Specifications:
- electrical parameters (tab.3)
- mechanical parameters (tab.4)
- operation safety (tab.5)
- operating parameters (tab.6)
Electrical parameters (tab. 3)
Mains supply
230V/AC (-15%/+10%)
Current up to
0,14 A
Power frequency
50Hz
Supply power
17 W
Efficiency
70%
Output voltage
11,0 V÷ 13,8 V DC – buffer operation
10,0 V÷ 13,8 V DC – battery-assisted operation
Output current
1,0A (without battery)
0,8A + 0,2A battery charge
0,5A + 0,5A battery charge
Output voltage setting, escalation and keeping
time
10ms / 34ms / 12ms
Voltage adjustment range
12,0 V÷ 14,5 V
Ripple
30 mV p-p max.
Current consumption by PSU systems
13 mA – battery assisted operation
Battery charge current
0,2A / 0,5A -
I
BAT
jumper selectable
Short-circuit protection SCP
200% ÷ 250% of supply power current limitation and/or fuse
damage in the battery circuit (fuse-element replacement
required)
Overload protection OLP
110% ÷ 150% (@25ºC) of power supply - limitation with the
PTC automatic fuse, manual restart (the fault requires the
disconnection of the DC output circuit)
Battery circuit SCP and reverse polarity
protections
2A - current limitation, F
BAT
fuse (in case of a failure, fuse-
element replacement required)
Excessive discharge protection UVP
U<10,0 V (± 5%) – disconnection of (- BAT) battery,
configuration by the P
BAT
jumper
Technical outputs:
- FAC; indicates AC power failure
- TAMPER indicates enclosure opening
- R-relay type, 1A@ 30Vdc/50Vac max.
time lag about 5s/140s/1040s/2h20m30s (+/-5%)
- microswitch, NC contacts (
enclosure closed
),
0,5A@50V DC (max.)
F
BAT
fuse
F
MAIN
fuse
F2A / 250V
T315mA / 250V
Mechanical parameters (tab. 4).
Enclosure dimensions
185 x 265 x 95 (WxHxD) [mm] (+/- 2)
Fixation
154 x 253 x
Φ
6 x4 (WxH)
Fitting battery
7Ah/12V (SLA) max.
Net/gross weight
2,0/2,2 kg
Enclosure colour
ABS, IP65, light grey
Closing
Cheese head screw (at the front), lock assembly possible
Connectors
Power-supply:
Φ
0,63÷2,50 (AWG 22-10)
Outputs:
Ф
0,41÷1,63 (AWG 26-14),
Battery output BAT: 6,3F-2,5, 30cm,
TAMPER output: wires, 30cm
Notes
The enclosure has a removable mounting board with the PSU
systems.
Operation safety (tab.5).
Protection class PN-EN 60950-1:2007
I (first)
Degree of Protection PN-EN 60529: 2002 (U)
IP65
glands installation required:
P9 (Ф 4-8mm) x2
P13,5 (Ф 6-12mm) x1
Electrical strength of insulation:
- between input and output circuits of the PSU (I/P-O/P)
3000 V/AC min.
