MAINTENANCE
20
Changing Oil (See Fig 2
1
)
Oil drainage plug
Fig
21
Oil Fill & Dipstick
-22
-4
14
32
50
68
86
104
-30
-20
-10
0
10
20
30
40
SAE
30
10W
-30
Synthetic
5W
-30
5W
-30
Above 80
F
the use of 10W-30 may cause increased oil consumption.
Check oil level more frequently.
Note:
*
*
*
*
*
(4
C
) the use of SAE 30 will result in hard starting.
C
F
(27
C
)
Below 40
F
*
• Run the Generator until the Engine is warm, then shut OFF.
• Place generator on a level surface.
• Remove the crankcase dipstick.
• Place an oil pan underneath the oil drain hole to collect used oil.
• Remove the oil drain plug and allow oil to drain completely.
• Reinstall oil drain plug, tighten securely.
• Carefully add SAE 30 or 10W-30 to empty reservoir until the oil reaches the
threads of the oil fill hole (Crankcase Dipstick hole).
• Replace crankcase dipstick.
Oil Recommendations
• Do not use special additives.
• Outdoor temperatures can affect proper oil viscosity for the engine.
• Use the chart to select the best viscosity for the outdoor temperature range
expected.
Содержание PG7750BCO
Страница 1: ...Generator OPERATOR S MANUAL Model PG7750BCO support pulsar products com ...
Страница 26: ...DIAGRAMS 26 ...
