5
5. Technical data
MOUSE 07
Power supply
9÷15VDC
Power consumption: Alarm / Standby
23,0mA /19,0mA@13,8VDC
Sensor range
up to 14m
Operating angle
90°
PIR Sensor
2 components
Lens
29 areas in 5 levels
Microwave frequency
10,525GHz
Microwave power
10mW
Alarm signaling time
3s
Alarm type
AND / OR AUTO
Tamper protection (opening of the detector)
YES
Creep zone detection
YES
Alarm memory
YES
Maximum load of the contacts of the relay
100mA@40VDC /2,5-16Ω
Maximum load of the contacts of the tamper
40mA@30VDC
Operating temperature
-10°C÷55°C
Storage Temperature
-20°C÷60°C
Electromagnetic immunity
(radio frequency interference) RFI
30V/m (80MHz-2000MHz)*
LED (walk test)
YES
In accordance to the standard
EN 50131-2-4 Grade 2
Enclosure material
ABS
Accessories
Rotary handle (SN-1 version)**
Dimensions (H x W x D)
110 x 60 x 46mm
Resistance to animals
NO
In accordance with the standards:
R&TTE 99/5/CE
EN 50131-2-4: 2008
EN 50131-2-4 Grade 2
EN 50131-2-4 Class 2
CEI 79-2: I° Level
RoHS
* Required RFI immunity: 10V/m
**
The holder does not comply with the EN 50131-2-4 standard
Additional information
The manufacturer takes no responsibility for the defects that result from the damaging, malfunctioning or
inability to operate the equipment especially when resulting from failure to comply with the recommendations
and requirements contained in the manual.
It is necessary to periodically test the signaling device. The majority of Intrusion Detection Systems
indicates malfunctioning of the signaling devices and informs the user with an appropriate message on the
LCD keypad or LED light on the LED display. In case of such situation, the system installer shall be
immediately notified. Testing and control methods of Intrusion Detection Systems are specifically determined
by the installer.
The MOUSE 07 detector was made in accordance with the requirements of the EEC and 99/5/CE
directives. The Declaration of Conformity is available at
www.pulsar.pl
