Pulsar MICROFLOW, Инструкция по эксплуатации

Страница: 11 / 65

Page 5
Product Specification
Sensor body material Valox 357U
Mounting Connection Via
1” BSP or NPT back mounted thread, 45
o
Angled Mounting bracket (optional).
Mounting angle: 45° optimum and mounted at the centre line
of the channel with clear uninterrupted flow
Sensor body dimensions Diameter 90mm x height 140mm
Sensor body weight Nominal 0.7 kg
Transducer cable extensions 5-core screened
Maximum separation Up to 500m
Enclosure protection IP68
Max. & min. temperature (electronics) -20 ºC to +60 ºC (-4°F to +140°F)
CE and Radar Approval See EU Certificate of Conformity
ATEX Approval CML 16ATEX2331X, IECEx CML 16.105X
II 2 G Ex mb IIC T4 Gb
II 2 D EX mb IIIC T135
o
C Db Tamb -20
o
C to
+60
o
C
Velocity Range 0.2
– 6.0 m/s (0.66 ft/s – 19.7 ft/s)
Accuracy Greater of +/- 0.5% or 0.05 m/s (0.1 ft/s)
Optimum installation Install at an angle of 45° in line with flow. For
more information, see ‘Locating the
MicroFlow sensor’ section of this manual
Maximum channel width per sensor 1.5m
Radar K-Band (ISM)
Transmitter Power <15 dBm
Beam width 20° inclusive
Communication RS485 and Modbus RTU
– integrates with
compatible Pulsar controllers.
PC programming Via RS485 Modbus
Programmed data integrity Via non-volatile memory
PC setup and monitoring software MicroFlow PC
– compatible with XP (service
pack3), Win 7, Win 8, Win 10
Operating Voltage 10
– 28 V DC
Power Consumption 0.36W
Pulsar Process Measurement Limited operates a policy of constant development and improvement
and reserve the right to amend technical details as necessary.