www.pulsar.pl
INTW
12
Fig. 12. The „Wireless Security” window
Confirm the changes by pressing the „Save Settings” button and then confirm by pressing „Continue”.
The Wi-Fi interface can be reset now. To do that, press the „Reset” button on the module or simply
disconnect the power supply for a few seconds. After the reset, the connection between the interface and the router
should be back (the yellow LED is constantly illuminated).
4.6 STEP 4 – Setting the serial port parameters.
Once the connection between the Wi-Fi interface and the router is established, configure the
communication channel between the Wi-Fi interface and the power supply to which the interface is connected. To
do that, switch to the interface configuration panel in the browser (interface might require re-login to the page) and
choose the „Serial Ports” option from the „Configuration” menu.
Fig. 13. The interface configuration panel.
