Pulsar AWZ 502, Руководство пользователя

Страница: 4 / 12

www.pulsar.pl AWZ502
4
Caption: jumper on, jumper off
[2] START button (launching the PSU from a battery)
[3] STOP button (disconnection of the PSU, starting/finishing the battery test)
[4] F1 fuse in the battery circuit
[5]
Connectors:
BS - AC absence technical output – OC type (open collector)
hi-Z level = status: failure
L level = status: correct operation
AW- technical output of the PSU operation status – OC type (open collector)
hi-Z level = status: correct operation
L level = status: failure
[6] LED indicating over voltage protection (UVP) - on
[7] Connector of the temperature detector
[8]
J1,J2 pins- battery charging current selection
•
J1= J2= Ibat =0,6 A
•
J1= J2= Ibat =1,2 A
•
J1= J2= Ibat =1,8 A
•
J1= J2= Ibat =2,4 A
Caption: jumper on, jumper off
[9] P1 output voltage adjustment
[10] Acoustic indicator
Fig. 2. The view of the PSU pcb.
Table 2. Elements of the PSU (see Fig. 3.)
Element no. Description
[1] Isolation transformer
[2] Pcb of the PSU (Tab. 1, Fig. 2)
[3] TAMPER x2 micro switches (contacts) of the sabota ż e protection (NC)
[4] F
MAIN
fuse in the battery circuit (230V/AC)
[5]
L-N 230V/AC power supply connector, PE protection connector
[6] Battery connBAT = red, -BAT = black
Fig. 3. The view of the PSU.