Pulsar ACCOLADE 2 LRF XP50 PRO, Руководство пользователя

Страница: 5 / 15

5
Button Operation
OPERATION BUTTON
Power device on short press
Power device off
long press for 3
secs
Turn display off
long press for
less than 3 secs
Turn display on short press
Calibrate the microbolometer short press
Control discrete digital zoom short press
Change observation modes long press
VIDEO RECORDER BUTTON
Start/pause/resume video recording short press
Stop video recording long press
Switch to video / photo long press
Capture Photo short press
MAIN MENU BUTTON
Enter main menu long press
Navigation upwards/rightwards short press
Navigation downwards/leftwards short press
Confirm selection short press
Exit submenu without confirming selection long press
Exit menu (switch to viewing mode) long press
QUICK MENU BUTTON
Enter quick menu short press
Switch between quick menu options short press
Increase value short press
Decrease value short press
Exit quick menu long press
RANGEFINDER BUTTON
Activate rangefinder short press
Measure distance short press
Start/stop SCAN mode long press
Using the Battery Pack
Accolade 2 LRF Pro thermal imaging binoculars are supplied with a rechargeable Li-Ion Battery Pack IPS7 which
allows operation for up to 9 hours. Please remember to charge the Battery Pack before first use.
Battery Charging
Step 1. Install the battery into the
charger
•
Lift the lever (C) of the charger.
•
Remove the protective cover from
the Battery Pack.
•
Install the Battery Pack into the
charger.
•
Click the lever (C) .
Step 2. Сheck the current battery level
•
Upon installation, a green LED
indicator (D) on the charger will start
to glow and begin flashing:
- once if the battery charge ranges
from 0% to 50%;
- twice if the battery charge ranges
from 51% to 75%;
- three times if the battery charge ranges from 76% to 100%;
•
If the indicator lights green continuously, the battery is fully charged.
•
You can remove the battery from the charger by lifting the lever (С) .
•
If the indicator of the charger lights red continuously upon battery installation, probably the battery’s charge
level is lower than acceptable (the battery has been long in deep discharge). Keep the battery in the charger
for a long time (up to several hours), remove and re-insert it.
•
If the indicator starts blinking green, the battery is good.
•
If the indicator keeps lighting red, the battery defective. Do not use the battery!
Step 3. Сonnect the charger to the mains supply
•
Connect the Micro-USB plug of the USB cable to the port (E) of the charger.
•
Connect the Micro-USB plug to the mains adapter.
•
Insert the plug of the mains adapter to the 100-240 V socket.
Battery Installation
•
Lift the lever (10) .
•
Install the battery (9) all the way into the
dedicated slot on the device housing so that
element F appears from below.
•
Fix the battery by clicking the lever (10) .
D
E
C
F
10 9
UP
DOWN
ON/OFF REC