Pulsar 77411, Руководство по эксплуатации

Страница: 15 / 85

FUNCTION PiP
18
PiP («Picture in Picture») allows you to see
a zoomed image simultaneously with the
main image in a dedicated window.
STREAM VISION
1
9
6.9x
3.1x
The device keeps running.
The DISPLAY OFF function deactivates transmission of image to the
display by minimizing its brightness. This prevents accidental disclosure.
When the device is on, hold down the ON/OFF (1) button. Display
goes out, message «Display off» .
To activate the display, press briefly the ON/OFF button.
When holding down the ON/OFF button, the display shows «Display
off» message with countdown, the device will turn off.
Turn on/off the PiP function with a long press of the DOWN (5) button.
Change zoom ratio in the PiP window with a short press of the DOWN
button.
The zoomed image is displayed in a dedicated window, with the full
optical magnification being shown.
FUNCTION DISPLAY OFF
17
The main image is shown with optical magnification ratio which
corresponds to ratio x1.0.
When
PiP is turned on, you can operate the discrete and continuous
digital zoom. The full optical magnification will take place only in the
dedicated window.
When
PiP is turned off, the image is shown with the optical
magnification set for the PiP function.
ACCOLADE thermal imaging binoculars support Stream Vision
technology which allows you to stream an image from the display of your
thermal imager to a smartphone or tablet PC via Wi-Fi in real time mode.
You can find further guidelines on Stream Vision on our web site
www.pulsar-vision.com
Note: The Stream Vision application allows you to update the firmware
features of your thermal imager.
Scan the QR codes to download Stream Vision free of charge:
USB CONNECTION
20
Connect one end of the USB cable (16) to the Micro-USB (15) port of
your device, and the other end to the USB port of your PC/laptop.
Turn the device on with a short press of the
ON/OFF (1) button (device
that has been turned off cannot be detected by your computer).
Your device will be detected by the computer automatically; no drivers
need to be installed.
Two connection modes will appear
on the display:
Memory card (external memory)
and Power .
Select connection mode with UP
and DOWN buttons.
Confirm selection with a short press of the M button.
USB connection
Use as power
Use as memory card
24 23