Pulsar 77411, Руководство по эксплуатации

Страница: 10 / 85

=
Confirm your selection with a brief press of the M
button .
=
Press and hold down the М (3) button to enter the
main menu .
=
Select the desired palette with the UP (2)/DOWN
(5) buttons .
Calibration
Wi - Fi
settings
This menu option allows you to set up your device
for operation in a Wi-Fi network.
Wi-Fi setup
This menu option allows you to set a password to
access your thermal imager from an external
device.
The password is used to connect an external device
(i.e. smartphone) to your thermal imager.
=
Press and hold down the М (3) button to enter the
main menu.
=
Select the menu option with the UP (2)/DOWN (5)
buttons .
=
Press briefly the M button to enter submenu
«PAS».
=
The default password (12345 or 12345678
depends on product firmware) will appear on the
screen.
=
Set the desired password with the UP (2)/ DOWN
(5) buttons (button UP to increase value; button
DOWN to reduce). Switch between digits with a
short press of the M button.
=
Save the password and exit the submenu with a
long press of the M button.
Password
setup
Access
level setup
Owner
Guest
Access level setup
This menu option allows you to set required access
level of the Stream Vision application to your
device.
=
Access level Owner . The Stream Vision user has
the complete access to all device's functions.
=
Access level Guest . The Stream Vision user has
the access only to the real time video stream from
the device.
Settings
The following settings are available:
English
=
Select one of the available interface languages
with a short press of the UP / DOWN buttons:
English, French, German, Spanish.
=
Select option «Settings» with the UP (2)/DOWN
(5) buttons . Press briefly М to confirm .
=
Press briefly М to confirm .
Selecting interface language
=
Press and hold down the М (3) button to enter the
main menu.
=
«Language« with UP/ DOWN . Select option
=
Switch between languages with a short press of
the M button.
=
Save selection and exit the submenu with a long
press of the M button.
Language
Date
=
Select option «Settings» with the UP (2)/DOWN
(5) buttons . Press briefly М to confirm .
=
Select option «Date« with UP/DOWN.
=
Press and hold down the М (3) button to enter the
main menu.
=
Press briefly М to confirm .
Date setup
Black Hot palette (white colour corresponds to
low temperature, black colour – to high
temperature)
Red Hot
Red Monochrome
Rainbow
Ultramarine
Violet
Sepia
Note: A long press of the UP button (2) also
activates the change of a color palette.
Selecting calibration mode
There are three calibration modes: manual (M) ,
semi-automatic (SA) and automatic (А) .
=
Select the desired calibration mode with the UP
(2)/DOWN (5) buttons .
=
M o r e d e t a i l s i n t h e s e c t i o n « S e n s o r
calibration».
=
Confirm your selection with a brief press of the M
button .
=
Press and hold down the М (3) button to enter the
main menu .
14 13