72-910-16 Rev. N
Page 40 of 43
System Overfeed
– usually a malfunction condition where a feed pump fails in the Run (ON) condition
System Parameters
– see program parameters
TDS
– abbreviation for Total Dissolved Solids, measured in terms of electrical conductivity (
S/CM)
Temperature Compensation
– displays conductivity as if measured at 77°F (25°C)
Toroidal Conductivity
– Non-contacting conductivity sensor used for high values
Totalizer
– a re-settable function of the controller that keeps count of the number of water meter pulses
S/CM
– conductivity unit of measure. Often referred to as micro Siemens
Y-Strainer
– inline filter or screen to remove debris from system flow assembly
