Puls YR20.242, Руководство пользователя

Страница: 4 / 26

QS3.241
Q-Series
24V, 3.4A, S
INGLE
P
HASE
I
NPUT
Jul. 2020 / Rev. 2.3 DS-QS3.241-EN
All parameters are specified at 24V, 3.4A, 230Vac, 25°C ambient and after a 5 minutes run-in time unless otherwise noted.
www.pulspower.com Phone +49 89 9278 0 Germany
4/26
3. AC-I
NPUT
AC input
nom. AC 100-240V suitable for TN-, TT- and IT mains networks
85-276Vac continuous operation
60-85Vac full power for 200ms, no damage between 0 and 85Vac
276-300Vac < 500ms
Allowed voltage L or N to earth max. 276Vac continuous, IEC 62103
Input frequency nom. 50–60Hz ±6%
Turn-on voltage typ. 61Vac steady-state value, see Fig. 3-1
Shut-down voltage typ. 58Vac steady-state value, see Fig. 3-1
AC 100V AC 120V AC 230V
Input current typ. 1.67A 1.42A 0.82A at 24V, 3.4A, see Fig. 3-3
Power factor *) typ. 0.55 0.53 0.47 at 24V, 3.4A, see Fig. 3-4
Crest factor **) typ. 3.33 3.9 3.88 at 24V, 3.4A
Start-up delay typ. 360ms 350ms 330ms see Fig. 3-2
Rise time typ. 6ms 5ms 7ms 0mF, 24V, 3.4A, see Fig. 3-2
typ. 20ms 20ms 22ms 3.4mF, 24V, 3.4A, see Fig. 3-2
Turn-on overshoot max. 100mV 100mV 100mV see Fig. 3-2
*) The power factor is the ratio of the true (or real) power to the apparent power in an AC circuit.
**) The crest factor is the mathematical ratio of the peak value to RMS value of the input current waveform.
Fig. 3-1 Input voltage range Fig. 3-2 Turn-on behavior, definitions
Tur
n-
on
85V
Rated
input range
max.
500ms
V
IN
P
OUT
60V 300Vac 276V
Shut
-down
full
power
for
200ms
Start-up
delay
Rise
Time
O
ve
rs
hoot
- 5%
Output
Voltage
Input
Voltage
Fig. 3-3 Input current vs. output load at 24V Fig. 3-4 Power factor vs. output load
0.5 1.5 1.0 2.0 2.5 3.0 3.5A
0
0.3
0.6
0.9
1.2
1.5
1.8A
Output Current
Input
Current, typ.
230V
ac
120V
ac
100V
ac
Power
Factor, typ.
0.5 1.0 1.5 2.0 3.5A
0.35
0.4
0.45
0.5
0.55
0.6
Output Current
120V
ac
230Vac
2.5 3.0
100V
ac