Puls PD-20S, Руководство пользователя

Страница: 69 / 78

65
7. APPLICATION EXAMPLES
When PD-20S Digital Transmitter is supplied with the power, then screen shows
the weight value. To reset this value, and keys are simultaneously
pressed or ZERO\START input is enabled (if the input is set to this mode). By
pressing down the ENT key, process counter value is seen. To reset the process
counter, the keys and are pressed down at the same time. In the
process counter screen, if the key is pressed, pack value can be seen.
To return the normal screen, press the key ESC.
Device features two different operation mode as with tare or without tare.
• For operation without tare; parameter  must be entered with zero.
Null value must be entered to the parameter  . If desired, automatic tare
frequency (

) can be entered.
• For operation with tare; (Valid in the Mode

); Tare value must be
entered to the parameter  ; tolerance value must be entered to the
parameter  .
(E.G.: For operation mode with tare; you have a package and in order to enable
device to recognize this tare automatically after you put this package on the scale,
you are required to enter empty package weight into the parameter
 . Later,
enter the tolerance value you desired as +/- for the weight of this package to the
parameter
 . If we are to explain it with an example;
Weight of empty package: 1000 g
Tolerance value of your package: +/- 10 g
ESC