UZK12.261, UZO12.26
U-Series
B
ATTERY
M
ODULE
12V,
26AH
Mar. 2019 / Rev. 2.2a DS-UZK12.261
All parameters are typical values specified at, 25°C ambient temperature unless otherwise noted.
www.pulspower.com Phone +49 89 9278 0 Germany
6/10
11.
E
NVIRONMENT
Operational temperature
*)
-10°C to +50°C (14°F to 122°F)
For charging
Frequently charging below +5°C (41°F) reduced
the lifetime of the battery
-15°C to +60°C (5°F to 140°F)
For discharging
Storage temperature
-20°C to +50°C (-4°F to 122°F)
For storage and transportation
Recommendation:
Do not store at temperatures higher than 25°C
or performance and lifetime may change.
Humidity
5 to 95% r.h.
IEC 60068-2-30
Do not energize while condensation is present
Vibration sinusoidal
±4mm at 16.7Hz
fixed frequency for 1hour
Vibration in vertical mounting orientation
according to IEC/EN 61056-1
Shock
free fall from 20cm
onto a wooden floor
Shock with bottom down orientation
according to IEC/EN 61056-1
Altitude
0 to 6000m (0 to 20 000ft)
Degree of pollution
2
According to IEC 62477-1, not conductive
LABS compatibility
The unit does not release any silicone or other LABS-critical substances and is suitable for
use in paint shops.
Corrosive gases
ISA-71.04-1985, Severity Level G3
*) Operational temperature is the same as the ambient temperature and is defined as the air temperature 2cm below the unit.
12.
T
ERMINALS AND
W
IRING
The terminals are IP20 Finger safe constructed and suitable for field- and factory wiring.
Power terminals
Type
Screw terminals
Maximal wire size, solid wire
4mm
2
Maximal wire size, stranded wire
4mm
2
American Wire Gauge
AWG 12-10
Maximal wire diameter
3.5mm (including ferrules)
Wire stripping length
7mm / 0.28inch
Screwdriver
Slotted 3.5x0.5mm
Recommended tightening torque
0.5Nm, 4.5lb.in
Instructions:
a) Follow national installation codes and installation regulations!
b) Ensure that all strands of a stranded wire enter the terminal connection!
c) Unused terminal compartments should be securely tightened.
d) Ferrules are allowed.
