pullman Ermator W250P, Инструкция по эксплуатации

Страница: 11 / 24

Revision 2 10
Problem solving
W250P/W350P are manufactured and made for a severe environment and tasks, but the user must
notice that the machine contents of components which must be protected from hits and blows. Filter,
sealings connections are carefully chosen to serve the operator. Therefore must the machine be treated
with knowledge as to work correctly for many years.
Problem Cause Procedure
Motor doesn´t start No current Connect the machine
Defect cable Change
Defect switch Change
Motor stops immediately
Wrong fuse Connect to proper fuse
Motor runs, but no suction
Hose not connected Connect the hose
Hose blocked Clean the hose
Motor runs, but poor suction Hole on the hose
Change hose
Blocked filter Change filter
Suction unit loose Adjust
Dirt in the hose or Clean the hose and intake
intake
Defect sealings Change current sealing
Dust is blowing from motor Defect or loose filter
Adjust or change
Poor pumping
The pump or tubes are Clean the pump
choked up
Abnormal noise Order service
SAVE THESE INSTRUCTIONS!