PTZ Optics 12X-USB, Руководство пользователя

Страница: 58 / 62

55
Rev 1.2 7/15
USB Control of Camera
Connect a USB 3.0 cable from the camera to a computer’s USB3.0 port.
Install the software downloaded from:
http://huddlecamhd.com/wp-content/uploads/2014/04/AMCAP-USB-Camera-Configuration-Software.exe_.zip
(amcap.exe) and double click the .exe to start the program (there is no installation required).
From the Options Menu choose the Video Capture Filter command. Use the camera controls to control the camera.
Some early releases of the camera model may not support UVC control (control over USB).
Conferencing and other software that has integrated UVC Control functionality will be able to also control the camera via
USB.
Maintenance and Troubleshooting
Camera Maintenance

If the camera will not be used for a long time, please turn off the power switch.

Use a soft cloth or lotion-free tissue to clean the camera body.

Use a soft dry lint-free cloth to clean the lens. If the camera is very dirty, clean it with a diluted neutral detergent.
Do not use any type of solvent or harsh detergent, which may damages the surface.
Unqualified Applications

Do not shoot extremely bright objects for a long period of time, such as sunlight, ultra-bright light sources, etc...

Do not operate in unstable lighting conditions, otherwise the image may flicker.

Do not operate close to powerful electromagnetic radiation, such as TV or radio transmitters, etc…
Troubleshooting

No image
1. Check whether the power cord is connected, voltage is OK, POWER lamp is lit.
2. Check whether the camera can “self-test” after startup (camera will do a brief pan-tilt tour and return to the
home positon, or if preset 0 is set, the camera will return to the preset 0 position).
3. Check the BOTTOM dip switch and make sure the two dip switches are both set OFF. These switches are not
used in operating mode.
4. Check that the signal cable is connected correctly (HDMI or USB3.0 depending upon your application).