12
Rev 1.2 7/15
6. Recalling Presets
Pressing any of the numeric buttons 0-9 directly will
recall a stored preset position and settings.
Note:
No action will be executed if a specific numeric preset
position has not yet been saved.
Note:
Presets assigned via the IP interface do not correlate to
presets set via the IR remote control.
7. Camera Selection
Press the button corresponding to the camera with the IR
address that you want to operate. This allows for up to 4
cameras to be operated via the same IR remote in the
same room.
8. Camera IR Address Set
Press 3 buttons in the sequence shown to set/change the
camera’s IR address. This allows up to 4 cameras to be
controlled from the same IR remote control. Be sure that
only one camera is picking up the IR signal when you
perform this function. If multiple cameras receive the
command, they will all change to the new address.
Address 1: [*]+[
＃
]+[F1]
Address 2: [*]+[
＃
]+[F2]
Address 3: [*]+[
＃
]+[F3]
Address 4: [*]+[
＃
]+[F4]
Содержание 12X-USB
Страница 1: ...Rev 1 2 7 15 PTZ Optics 12X USB User Manual V1 2 English...
Страница 38: ...35 Rev 1 2 7 15...
Страница 42: ...39 Rev 1 2 7 15...
