HDMI Matrix Switcher 32x32
PTN Electronics Limited
12
www.PTN-electronics.com
9
、
Switch both video and audio signals synchronously: [x1] B[x2].
Example:
“2B12,13,15.” to transfer the signal from the input channel No.2 to the
output channel No.12,13,15.
10
、
Inquire the input channel to the output channel [x]: Status[x].
Example:
“Status3.” to inquire the input channel to the output channel No.3.
11
、
Inquire the input channel to the output channels one by one: Status.
Example:
“Status.” to inquire the input channel to the output channels one by one.
12
、
Save the present operation to the preset command [Y]: Save[Y].
Example: “Save7.” to save the present operation to the preset command No.7.
13
、
Recall the preset command [Y]: Recall[Y].
Example: “Recall5.” to recall the preset command No.5.
14
、
Clear the preset command [Y]: Clear[Y].
Example: “Clear5.” to clear the preset command No.5.
9. Safety Operation Guide
In order to guarantee the reliable operation of the equipments and safety of the staff
，
please abide by the following proceeding in installation, using and maintenance:
1)
The system must be earthed properly. Please do not use two blades plugs and
ensure the alternating power supply ranged from 100v to 240v and from 50Hz to
60Hz.
2)
Do not put the switcher in a place of too hot or too cold.
3)
As the power generating heat when running, the working environment should be
maintained fine ventilation, in case of damage caused by overheat.
4)
Cut off the general power switch in humid weather or left unused for long time.
5)
Before following operation, ensure that the alternating current wire is pull out of the
power supply
：
Take off or reship any components of the equipment.
Take off or rejoin any pin or other link of the equipment.
6)
As to non-professional or without permission, please DO NOT try to open the casing
of the equipment, DO NOT repair it on your own, in case of accident or increasing
the damage of the equipment.
7)
DO NOT splash any chemistry substance or liquid in the equipment or around.