HDMI Matrix Switcher 32x32
PTN Electronics Limited
10
www.PTN-electronics.com
Command
Types
Command
Codes
Functions
System
Command
/*Type;
Inquire the models information.
/%Lock;
Lock the keyboard of the control panel
on the Matrix.
/%Unlock;
Unlock the keyboard of the control
panel on the Matrix.
/^Version;
Inquire the version of firmware
/:MessageOff;
Turn off the feedback command from
the com port. It will only show the
“switcher OK”.
/:MessageOn;
Turn on the feedback command from
the com port.
EDIDMInit.
Recover the factory default EDID data.
EDIDM[X]B[Y].
Manually EDID switching. Copy the
EDID data of output[X] to the input[Y].
Undo.
To cancel the previous operation.
Demo.
Switch to the “demo” mode, 1->1, 2->2,
3-
>3 … and so on.
Operation
Command
（
PTN2.0
Command
System
）
[x1]All.
Transfer signals from the input channel
[x1] to all output channels
All#.
Transfer all input signals to the
corresponding output channels
respectively.
All$.
Switch off all the output channels.
[x1]#.
Transfer signals from the input channel
[x1] to the output channel [x1].
[x1]$.
Switch off the output channel [x1].
[x1] V[x2].
Transfer the video signals from the input
channel [x1] to the output channel [x2].
[x1] V[x2],[x3],[x4].
Transfer the video signals from the input
channel [x1] to the output channels [x2],
[x3] and [x4].
[x1] B[x2].
Transfer both the video and the audio
signals from the input channel [x1] to
the output channel [x2].
[x1] B[x2],[x3],[x4]..
Transfer both the video and the audio
signals from the input channel [x1] to
the output channels [x2], [x3] and [x4].
Status.
Inquire the input channel to the output
channels one by one.