39
•
EN
4.6 Synchronizing receiver and microphone
Synchronize the receiver with a microphone after the basic setting via the infrared interfaces of the devices.
Settings that you change after synchronization are automatically transferred to the transmitter via the iSync
radio connection without any action on your part.
Select the desired receiving channel with the channel button RX1 or RX2.
Press the control knob to enter the menu.
Turn the control knob and navigate to menu item
Sync
.
Press the control knob to start the synchronization and turn on the microphone.
The sync symbol will pulsate in the display and the infrared interface starts flashing
red. Hold the transmitter’s infrared interface in front of the receiver’s infrared interface.
When the transfer is complete, the infrared interface stops flashing. The display now
shows the information of the microphone.
Press this button to return to the standard display.
4.7 Enabling lock mode
You can lock the device against unintentional operation. When lock mode is switched on, it is not possible to
change settings. For normal operation, the lock mode must be switched off again.
Press the control knob to enter the menu.
Turn the control knob and navigate to menu item
Lock
.
Select the menu item. The current setting can now be changed.
Select the ON setting with the control knob.
Press the control knob to confirm.
When the lock mode is switched on, the display shows a lock and it is not possible to
change settings.
Press and hold the control knob to switch the lock mode off again. Normal operation is
now possible again.
Sync
Sync
RX01
Scan
Group
Channel
Freq
Sync
RX01
Scan
Group
Channel
Freq
Sync
BEAVELEO
RX3
RX4
USER
RX1
RX2
CH1/2
RX01
Lock
Tx Gain
Rx Gain
Low Cut
Squelch
LOCK
ON
RX01
Lock
Tx Gain
Rx Gain
Low Cut
Squelch
LOCK
OFF
RX01
Lock
Tx Gain
Rx Gain
Low Cut
Squelch
LOCK
ON
RX3
RX4
USER
RX1
RX2
RX3
RX4
USER
RX1
RX2
