W W W . P S S O . D E
27
Before installing the eye bolts, make sure that the thread is always in perfect condition and free from dirt etc.
Install the eye bolts in the threaded holes of the speaker system. The eye bolts must be tightened until stop
position, hand-tight and without any tools.
Insert the quick links of the safety bonds in the eye bolts of the speaker system. Pull the safety bonds over a
safe fixation spot. Insert the end in the quick link and tighten the safety screw.
The maximum drop distance must never exceed 20 cm. A safety rope which already hold the strain of a
crash or which is defective must not be used again.
Installation on a Wall Mounting
When installed on a wall mounting, the speaker system must always be secured with a safety bond. Before
attaching the speaker system, make sure that the installation area can hold a minimum point load of 10 times
the installation's weight (e.g. 13 kg weight - 130 kg point load).
The durability of the installation depends very much on the material used at the installation area (building
material) such as wood, concrete, gas concrete, brick etc. This is why the fixing material must be chosen to
suit the wall material. Always ask a specialist for the correct plug/screw combination indicating the maximum
load and the building material.
Stacking
This speaker system may only be installed on top of another speaker system if both systems are lashed up
with each other via appropriate clamping belts and protected against flipping over.
DANGER TO LIFE!!
Before taking into operation for the first time, the installation has to be approved by an expert!
