2. Move the parameter that you want to unlink with the mouse pointer (for example, the Lever). Alternatively,
you can instead move the controller that you want to unlink on your MIDI keyboard or controller. The MIDI
Forget icon's color should change back to gray. The hint text will now display “
MIDI Forget -
successfully detached parameter: Lever from CC#1
“
for about 3 seconds. In order to reset to
default MIDI configuration, hold CMD (Mac) or CTRL (PC) and double-click the 'MIDI' label located in the
bottom left corner of the plug-in window.
Lever Mode Switch
This control sets the lever mode. Three modes are available:
•
Cont
- continuous mode
•
Snap
- quantized mode
•
Swi3
- the 'three-state switch' mode (the lever acts as a three-state switch with stop in the middle)
Speed Mode Switch
This control sets the speed mode. Four modes are available:
•
FastDwn
- fast speed is set when the speed button is pressed, slow speed is set when the speed button is
released
•
FastUp
- fast speed is set when the speed button is released, slow speed is set when the speed button is
pressed
•
Trigger
- pressing the speed button triggers the scanner speed (from slow to fast, from fast to slow)
Hint Bar
Hint Text / MIDI Learn Guide
Hints
on/off
Hint Text / MIDI Learn Guide
A short description of the control that your mouse is hovering over. In MIDI Learn/Forget mode, hint text dis-
plays information related to the parameter and/or control that is currently being linked. Double-clicking the dis-
played address (www.PSPaudioware.com) opens our website in a new browser window.
Hints on/off
Click to show or hide hints in the hint bar.
11
