Psion Teklogix Vehicle-Mount Computer 8515, Руководство пользователя

Страница: 107 / 190

Chapter 5: Configuration
The Devices Tab
Psion Teklogix 8515 Vehicle-Mount Computer User Manual 81
Figure 5.36 Devices Tab
5.6.1.1 Scan
• Tap on the Scan button to list available devices.
Figure 5.37 Scan
Wait for the 8515 to complete its scan (approximately 20 seconds). When scanning starts,
the
Scan button will change to Stop— if necessary, you can tap on this button to stop the
process. Once scanning is complete, all discovered devices will be displayed in the list box,
with
Name , Address , Active status, and PIN information.
The Active column indicates whether any service is activated for that device. When a
service is activated, the device is displayed in the list even when it is not detected during
the scan.
The
PIN column indicates whether you have a PIN (password) set for the device.
Note: During the scanning process, addresses are located first, followed by names.
Only the names of devices that are within the Bluetooth radio coverage range
will be retrieved.