manualshive.com logo in svg

Psion Teklogix Vehicle-Mount Computer 8255, Руководство пользователя

Поделиться
Скачать
Psion Teklogix Vehicle-Mount Computer 8255 Скачать руководство пользователя страница 155

Teklogix 7035, 8255 & 8260 Terminals User Manual

129

Chapter 7:Setting Parameters

Power – 7035 Only

7.5.12  Power – 7035 Only

CPU Speed

Important:

Changing the CPU speed can invalidate FCC approvals. Cisco 
and Lucent radios are approved for 33Mhz. The Narrow Band 
radio is only approved for 8 MHz.

This parameter allows you to change the CPU speed your terminal uses. Allowable 
values are:

 8MHz, 16MHz 

and

 33MHz

.

Power Down

When the amount of time specified in the “Power Down” parameter expires without 
any activity, the terminal goes into suspend mode, a power-saving mode. Pressing 
<ENTER/ON> reinstates full power mode.

The possible values for this parameter are: 

Disabled, 1 min, 2 mins, 

4 mins, 8 mins, 16 mins, 32 mins 

and

 60 mins

.

Power Off

Important:

The value assigned for this parameter is not recognized until the 
value in the “Power Down” parameter has expired.

When the time specified for the “Power Off” parameter has expired, the terminal 
turns off. A full reboot is required to return the terminal to full operating mode. The 
allowable values for this parameter are: 

Disabled, 1 min, 8 mins, 16 

mins, 32 mins, 1 hour, 2 hours 

and

 4 hours.

This timeout occurs whether the terminal is turned on or off. That is, even if the 
terminal is switched off, it will return to its last operating state when switched on. If 
it is left ‘off’ for the time period specified by this parameter, a full reboot will occur 
when switched back on.

7.5.13  Serial Number

This parameter identifies the terminal serial number. Normally, this value is set at 
the factory. However, the serial number can also be defined in the field using a serial 
download cable and a terminal connection to PMENU. 

Note:

“Serial Number” is saved in EEPROM; it will not be erased if the 
parameter values are defaulted.

CPU speed

33MHz

8, 16, 33MHz

Power down

4 mins

see text

Power off

1 hour

see text

Range

Power

Содержание Vehicle-Mount Computer 8255





























































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды