Psion Teklogix 9160 G2, Руководство пользователя, Страница: 84 / 436

Chapter 6: Managing Access Points & Clusters
Modifying The Location Description
60 Psion Teklogix 9160 G2 Wireless Gateway User Manual
6.4.1 Modifying The Location Description
To make modifications to the location description:
1. Navigate to the
Cluster > Access Points tab.
2. Under the Clustering Options section, type the new location of the AP in the
Location field.
3. Click the Update button to apply the changes.
6.4.2 Setting The Cluster Name
To set the name of the cluster you want your AP to join, do the following:
1. Navigate to the Cluster > Access Points tab.
2. Under the
Clustering Options section, type the new cluster name in the
Cluster Name field.
3. Click the Update button to apply the changes.
Note: If you want multiple APs to join a particular cluster, all these APs should have the
same Cluster Name specified in the Cluster Name field. If the cluster name is differ-
ent, the AP will not be able to join the cluster.
6.5 Starting Clustering
To start clustering and add a particular access point to a cluster, do the following.
1. Go to the Administration Web pages for the standalone access point. (See “Navigating
To An AP By Using Its IP Address In A URL” on page 61.)
The Administration Web pages for the standalone access point are displayed.
2. Click the Cluster > Access Points tab for the standalone access point.
3. Click the Start Clustering button.
The access point is now a cluster member. It appears in the list of clustered access
points on the
Cluster > Access Points tabbed page.
Note: In some situations it is possible for the cluster to become out of sync. If after adding
an access point to the cluster, the AP list does not reflect the added AP or shows an
incomplete display; refer to the information on Cluster Recovery in Appendix C:
“Troubleshooting” .