Psion Teklogix 9160 G2, Руководство пользователя, Страница: 148 / 436

Chapter 11: Maintenance And Monitoring
Depth
124 Psion Teklogix 9160 G2 Wireless Gateway User Manual
If you set the Severity level to 7, all messages with a severity level between 7 and 0 will
appear in the Event log. Alternatively, if you want to filter messages, you can set the Severity
level to 4. In this instance, all messages with a severity level between 4 and 0 will appear in
the Event log. Therefore, less severe messages and notices will be ignored.
11.2.3 Depth
The value specified in the Depth field determines the number of log entries that can be saved
to NVRAM. You can save up to a maximum of 128 entries. If you rely on log messages for
monitoring the performance of your AP, you should set the
Depth value to the maximum of
128 .
11.2.4 Log Relay Host For Kernel Messages
• “Understanding Remote Logging” on page 124.
• “Setting Up The Log Relay Host” on page 125.
• “Enabling/Disabling The Log Relay Host On The Status, Events Page” on page 126.
11.2.4.1 Understanding Remote Logging
The Kernel Log is a comprehensive list of system events (shown in the System Log) and
kernel messages, such as error conditions like dropping frames.
Table 11.2 Severity Configuration Settings
Severity Level Description
0 Emergency:
system is unusable
1 Alert:
action must be taken immediately
2 Critical: critical condition
3 Error:
error condition
4 Warning:
warning conditions
5 Notice:
normal but significant condition
6 Informational: information messages
7 Debug: debug-level messages