Psion Teklogix 9160 G2, Руководство пользователя, Страница: 176 / 436

Chapter 13: Setting The Wireless Interface
Updating Wireless Settings
152 Psion Teklogix 9160 G2 Wireless Gateway User Manual
13.7 Updating Wireless Settings
To update wireless settings:
1. Navigate to the
802.11 Settings page.
2. Configure the wireless settings as required.
3. Click the
Update button to apply the changes.
Table 13.5 Guest Network Wireless Settings
Field Description
MAC Address Shows the MAC address for the Guest interface for this access point. This is a read-only field that you can-
not change.
Although this access is point is physically a single device, it can be represented on the network as two or
more nodes each with a unique MAC Address. This is accomplished by using multiple
Basic Service Set
Identifiers ( BSSID ) for a single access point.
The MAC address(es) shown for the “Guest” access point is the BSSID(s) for the “Guest” interface.
For the two-radio AP, two MAC addresses are shown: one for each Radio on the Guest interface.
Wireless Net-
work Name
(SSID) Enter the SSID for the guest network .
The Service Set Identifier ( SSID ) is an alphanumeric string of up to 32 characters that uniquely identifies
a wireless local area network. It is also referred to as the Network Name . There are no restrictions on the
characters that may be used in an SSID.
For the guest network, provide an SSID that is different from the internal SSID and easily identifiable as the
“guest” network.