13
Psiber Data Systems Revision 2.01
PingerPro User Guide
Ping
Ping
is a network tool used to test whether a particular host is reachable across an IP network. There are
two options;
Single
or
Continuous
. When selecting
Continuous
, there can only be one ping target device
selected.
Continuous
ping will only operate in the Ping Test.
Single
will ping a device the number of times defined in the
Count
field.
Count
determines the number of
times to ping a device. Selecting the
Count
Button will display a numerical keyboard screen, allowing the
user to adjust the parameter. After entering a valid number, select
OK
to return to the
PING
screen. Select
the
Save
button to save the configuration.
Setup Ping Screen
Numerical Keyboard
Payload
is the amount of data sent with the ping packet in bytes. Select the
Payload
button to display a
numerical keyboard. After entering a valid number between 56 and 1518 bytes, select
OK
to return to the
Ping
screen.
Timeout
is the amount of time the PingerPro waits before a ping response returns. Select the
Timeout
button to display a numerical keyboard. After entering a valid number, select
OK
to return to the
Ping
screen.
Interval
is the amount of time the PingerPro waits before sending out another ping packet. Select the
Interval
button to display a numerical keyboard. After entering a valid number, select
OK
to return to the
Ping screen.
Select the
Ping
button with the
<
arrow to return to the Main Setup Screen or select the
Ping List
button
to continue to The Ping List Setup Screen.
