Troubleshooting and Diagnostics
Display
That means...
Measure
6-3
13 JAM BEFORE FUSER
13 JAM UPPER INPUT
13 JAM LOWER INPUT
13 JAM NEAR PC-CART.
13 JAM NEAR FUSER
13 JAM NEAR CUTTER
Paper jam at position ...
... between transfer and
fuser area
... near to the upper
paper input
... near to the lower
paper input
... near to the PC-
Cardridge
... near to the Fuser unit
... near to the cutter
position or in the
paper exit area
... pendulum of intelli-
gent paper stacker
iPS 4050/406
Clear the paper path; see
figure below
If there is no jam visible or
even no paper inserted
into the printer dirty
sensors might be the
cause for the error
message. Clean the
optical sensors and the
paper path around them
with a soft, dry cloth.
... and set paper to park
position
Stack the paper properly
by manual intervention.
Tear off the paper and
reload it properly.
If there is no real jam in
the iPS but the sensor
was activated, press
to continue.
Troubleshooting and Diagnostics
6-4
Note:
For recovery after paper jam see next pages!
