Installing the Printer and the intelligent Paper Stacker
1-3
S
Weight and Dimensions
The printer´s weight is 112 kg (247 lbs.) with all consumables included.
The printer and the optional intelligent paper stacker both together weigh
164 kg (361 lbs.).
S
Dimensions
Printer
Printer incl. Stacker System
Width
810 mm; 32.9 inch
1.040 mm; 40.9 inch
Height
350 mm; 13.8 inch
1.140 mm; 44.9 inch
Depth
780 mm; 30.7 inch
780 mm; 30.7 inch
S
Accessability
To facilitate the handling of the printer (and the stacking system) by the
operator the below mentioned distances around the printer should be met
minimally:
S
Front
700 mm / 27.6 inch
S
Rear
140 mm / 5.5 inch
S
Left
480 mm / 18.9 inch
S
Right
400 mm / 15.8 inch
Note:
The intelligent paper stacker is equipped with castors which allow to
move the entire configuration to an empty space in case of maintenance
activities.
S
Preconditions for Installation
Floors and doors must be wide enough that the printer can pass them;
corners and angles must be large enough such that the printer can be
turned if necessary. For example a door must be 80 cm (31.5 inch) wide
minimally.
Elevators must be able to carry the printer and the personnel who transport
it. Doors of the elevators must be wide enough that the printer can pass
them.
It must be ensured that the floor space where the printer is to be installed
does not exceed the following horizontal inclinations:
S
from the front to the rear
+ 1
E
S
from the left to the right
+ 2
E
It must be safeguarded that an approved mains voltage wall socket is
available which provides for correct and sufficient current; the mains cord
must extend to the wall socket.
Installing the Printer and the intelligent Paper Stacker
1-4
1.2
A First Look at the devices
1 Laser Printer
3 Paper Exit for Cut Sheets
5 Paper Exit for Fanfold Paper
7 Control Panel
9 Upper Tractor
11 Pendulum
13 Shelf for Lower Tractor
15 Castors
2 Rear Cover
4 Top Cover
6 Front Cover
8 Lower Tractor
10 intelligent Paper Stacker (iPS)
12 Paper Exit Tray
14 Shelf for Upper Tractor
Note:
The intelligent Paper Stacker (10) - also called
iPS 4050/4060
- is an
option!
Note:
The Printer drivers for Windows ® are available - see Appendix
C Order
Numbers
.
