4
SMOKE DETECTOR
We highly recommend the use of a smoke detector. It must be installed at least 15 feet (4,57
m) from the appliance in order to prevent a false alarm when refueling the fire.
DOOR GLASS
To maintain a clean and safe installation, do not build your fire too close to the glass or allow
the logs to lean on the glass.
Do not operate your furnace at too low a setting. Keep the air inlet opened long enough during
the fire start-up to prevent the fire from going out, which would soot up the door glass.
An intense fire will help keeping the glass clean. However, in the event that your glass gets too
dirty, which should not occur, you will have to clean it using a wet cloth and an oven cleaner. The
glass can be cleaned
ONLY
when the unit has cooled down. Do not use abrasive cleanser. You
can find special cleansers for wood stove glasses in any wood stove or hardware store.
WARNING: Avoid knocking or scratching the glass which could be damaged.
GLASS SPECIFICATIONS
The glass is made of Neoceram type of glass, 3/16” – (5 mm) thick.
Do not operate your furnace with a broken glass, as this could seriously damage your
appliance.
You can purchase a replacement glass from your PSG dealer.
ASH DRAWER
Your appliance is equipped with an ash drawer to collect ashes produced by the combustion of
wood. This drawer must not be left opened during combustion as this will cause over firing and
serious damage to the furnace*.
The drawer must be cleaned regularly.
ASH GRATE
In case of ash grate damage, contact your dealer to get a replacement. The steel cover on the
ash grate is meant to optimize the temperature inside the combustion chamber and should only
be removed to empty the ashes.
*It is mandatory that the door and the ash drawer be kept closed while the appliance is in use.
Maintain all seals in good condition ; in case of deterioration, contact your dealer for replacement.
