SPECIFICATION OF PV CHARGE CONTROLLER
6
After normal display of the LCD, then connect solar
panel to the solar controller
Note: Right connect the positive and negative
Caution: If there is no combiner in the system, we
require user to add a breaker between the controller and
PV arrays. And before you connect them, please ensure
that the breaker is off.
Warning: Risk of electric shock! The solar module’s
high voltage output can cause severe shock or injury.
Be careful operation when installing solar wiring.
3.4.3
Connect loads to the controller
NOTE: Right connect the positive and negative
3.4.4
Confirm the wiring
Double check the all the wiring steps above. Confirm
all connections are right and tightened. Then do the
next step.
3.4.5
Caution: If you want to remove the system, please follow
the following steps strictly:
➢
Turn off the combiner or breaker between solar
module(s) and controller, then remove the solar
module(s) from controller first!
➢
Second move the battery
➢
Last move the load
4.
Operation
4.1
Instruction of HMI interface
D E F
A
B
C
G H
