PSA panacom PAN930FKHD, Инструкция по эксплуатации

Страница: 24 / 34

Camera1
Camera 2
Off Status
Auto
Signal type
20s
Signal mode
Motion detection duration
Medium Motion detection sensibility
Off Motion detection
Video Record mode
5s Ring time
NO Sensor type
Auto
Status : Indicates the status of this channel. If set to On, the camera can be used normally.
If set to off, the camera is disabled.
Sensor type : Th e C AM1, CAM2 channels cor r espond to the I/O status (see the status
description below), which means that when an alarm is triggered, it activates the
corresponding channel to initiate an alarm log or capture a snapshot.
Normally open : Under normal conditions, the sensor is kept at a constant low voltage. If
the output voltage goes from low to high, an alarm is triggered.
Normally closed : Under normal conditions, the sensor is kept at a constant high voltage.
If the output voltage goes from high to low, an alarm is triggered.
I/O status type
Off : If the external sensor alarm is not used, set I/O to “Off”.
Alarm time : Indicates the ringing duration after the CAM triggers the alarm. The time range
is 1-20s and the default is 5s.
Record mode : There are two recording modes: Record video and Snapshot. Record means
tha t w h e n a n a l a r m i s t r i g g e r e d , t h e i n d o o r m o n i t o r w i t h t h e M i c r o S D c a r d
automatically starts recording until the alarm ends or the user presses button
to stop manually. Capture is when the alarm is triggered, the indoor monitor with the
MicroSD card automatically captures the photo of the camera. The user can also
manually press button to capture continuously.
Motion Detection Sensibility : Indicates the sensitivity of motion detection. Options are
Low, Medium & High. “Low” denotes difficult to trigger motion detection, whereas
“High” denotes easy to trigger motion detection.
Signal mode : There are three modes: Auto, PAL, and NTSC. When set to Auto, the indoor
monitor automatically detects the camera's system.
Signal type : There are seven signal types: AHD1080, AHD720, CVBS, CVI1080, CVI720,
TVI1080, and TVI720. If the signal system is set to PAL or NTSC, these seven types
can be selected and used together. If the Signal Mode is set to Auto, then the Signal
Type can not be changed from Auto.
15.3.3 Camera Setting
Motion detection : Indicates whether to detect and record when an object moves in front
of the device.
Motion detection duration : The recording time of motion detection can be set to 10s-5 minutes,
and the default is 20s.