PSA panacom PAN930FKHD, Инструкция по эксплуатации

Страница: 18 / 34

14.MOTION DETECTION
2. In Standby mode, tap the Master Monitor > Setting > System Setting > select MD preview
switch to start motion detection preview.
3. Once motion detection (MD) is enabled for a Door Station (or a camera), any movement in
front of the door (or camera) will trigger an MD event. If the “Motion Detection Preview” is
turned ON, the Monitor will display an image while recording. Otherwise, no image is
displayed but it continues to record in the background.
Motion detection with following conditions:
1. In Standby mode, tap the Master monitor(DeviceID:1) > Setting > Door (or Camera ) >
Select Device > Select motion detection switch to turn on motion detection.
1. Motion Detection is only active for the device (eg. Door1) if its Motion Detection turned ON.
Movement on other devices is ignored.
2
. If more than one Motion Detection channel is active, the first device to detect motion will
be displayed first. Motion detected on other devices will wait for the first device to finish its
motion detection period, before they can be serviced in turn.
3. If the Master Monitor is installed with a suitable MicroSD card,
it will make snapshot or record
video automatically while motion detection activated.
4. While the Digital Photo Frame is running: If the Motion Detection Preview is ON, a motion
detection event will interrupt the Digital Photo Frame display. However if the Motion Detection
Preview is OFF, only a "Motion Detection" notification message is displayed.
Note: The default motion detection recording time is 20 seconds. The motion detection event
expires after this period.